I have a constant steady tone coming from my remote.

This is typically the result of improper system initialization. Areas to look at include:
  • Remote control
  • Display
  • Controller
    Yes No
Step 1
Check your remote, pigtail and connection to the display. Make sure they are not damaged and are connected properly. Are the cable, connections and remote okay?
Go to step 2
Reconnect and/or replace as necessary and retest
Step 2 Reset system power. Disconnect the controller from vehicle power for 30 seconds then reconnect. Did this correct your problem? Done Go to step 3
Step 3 Contact your INTEC Service Rep. They may ask you to return your remote control, controller and/or display for service.    

Printable version of the above topic.